{"title":"VA STI Engine - Intakes","description":null,"products":[{"product_id":"aem-2018-subaru-wrx-sti-2-5l-h4-f-i-cold-air-intake-system-wrinkle-red","title":"AEM 2018 Subaru WRX STI 2.5L H4 F\/I Cold Air Intake System - Wrinkle Red","description":"The AEM 21-836WR Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru WRX STI models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable textured red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-836WR vehicle applications to determine the legal status for each vehicle.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eType RA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"AEM Induction","offers":[{"title":"Default Title","offer_id":44150427615275,"sku":"AEM21-836WR","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/c838a15a5a87afee46ad92963e8a1e6d.jpg?v=1780411555"},{"product_id":"aem-19-21-subaru-wrx-sti-2-5l-h4-cold-air-intake-system","title":"AEM 19-21 Subaru WRX STI 2.5L H4 Cold Air Intake System","description":"AEM cold air intake systems are designed to increase horsepower and torque. The system includes an oversized AEM DRYFLOW synthetic washable air filter, engineered to provide outstanding airflow, filtration, and performance, and also features a mandrel-bent aluminum intake tube and high quality hardware. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the factory fresh air duct attaches to the heat shield. The entire system can typically be installed in less than 90 minutes.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eS209\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"AEM Induction","offers":[{"title":"Default Title","offer_id":44150430990379,"sku":"AEM21-863C","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/50c92f08e08f629e954a284cfbc785fcL.jpg?v=1780411563"},{"product_id":"aem-induction-2019-subaru-wrx-sti-2-5l-cold-air-intake-wrinkle-red","title":"AEM Induction 2019 Subaru WRX STI 2.5L Cold Air Intake - Wrinkle Red","description":"AEM cold air intake systems are designed to increase horsepower and torque. The system includes an oversized AEM DRYFLOW synthetic washable air filter, engineered to provide outstanding airflow, filtration, and performance, and also features a mandrel-bent aluminum intake tube and high quality hardware. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the factory fresh air duct attaches to the heat shield. The entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eS209\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"AEM Induction","offers":[{"title":"Default Title","offer_id":44150431383595,"sku":"AEM21-863WR","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/250b2198a07ff68d6f801b029dc711e2.jpg?v=1780411564"},{"product_id":"subaru-sf-intake-airbox-15-17-sti","title":"Subaru SF Intake + Airbox 15-17 STI","description":"Subaru SF Intake + Airbox 15-17 STI\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLaunch Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"COBB","offers":[{"title":"Default Title","offer_id":44155953610795,"sku":"COBB715315-BK","price":540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/59b01d5a-6919-4b3e-b72e-a44915ad28f8-800_fa6added-ea82-4873-bcd7-293fd07101fa.jpg?v=1780477357"},{"product_id":"cobb-cold-air-intake","title":"COBB Cold Air Intake","description":"Cobb 2015 Subaru STi SF Blue Intake \u0026amp; Air Box\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLaunch Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"COBB","offers":[{"title":"Default Title","offer_id":44155953676331,"sku":"COBB715315-BL","price":540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/218b954c-6262-4939-aee8-5e2ddd0d49a6-800.jpg?v=1780477358"},{"product_id":"perrin-08-14-subaru-wrx-08-15-sti-cold-air-intake-red","title":"PERRIN 08-14 Subaru WRX \/ 08-15 STI Cold-Air Intake - Red","description":"PERRIN 08-14 Subaru WRX \/ 08-15 STI Cold-Air Intake - Red\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLaunch Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eSeries.HyperBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Perrin Performance","offers":[{"title":"Default Title","offer_id":44273909235755,"sku":"PERPSP-INT-322RD","price":348.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/063b334d-5226-4602-90d8-e6b84003d386-800.jpg?v=1782976126"},{"product_id":"k-n-2015-subaru-wrx-sti-2-5l-h4-red-typhoon-short-ram-intake","title":"K\u0026N 2015 Subaru WRX-STI 2.5L H4 Red Typhoon Short Ram Intake","description":"Gain a guaranteed increase in horsepower and torque with a K\u0026amp;N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLaunch Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eSeries.HyperBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":44275029999659,"sku":"KNN69-8007TWR","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/caacb473-c8de-4352-8ed8-acb95a4111ac-800.jpg?v=1782986315"},{"product_id":"k-n-2018-subaru-wrx-sti-h4-2-5l-f-i-typhoon-performance-intake","title":"K\u0026N 2018 Subaru WRX STI H4-2.5L F\/I Typhoon Performance Intake","description":"Gain a guaranteed increase in horsepower and torque with a K\u0026amp;N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eS209\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eType RA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":44275030065195,"sku":"KNN69-8009TWR","price":367.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/71585b2dee031d2ab5dcfbe99ccdc706.jpg?v=1782986315"},{"product_id":"injen-2015-subaru-sti-2-5l-4cyl-evolution-intake-w-ram-air-scoop","title":"Injen 2015 Subaru STI 2.5L 4cyl Evolution Intake w\/ Ram Air Scoop","description":"Roto-molded Housing and Ram Air Scoop: The EVO1206 system features our 2-piece box design that incorporates our boost plenum. The box attaches to our fully incorporated ram air scoop to capture the maximum amount of cool air to feed that hungry turbo. , , 6061 Aluminum Intake Tube: The EVO1206 Evolution Air Intake System uses a custom designed and dyno-tuned, aluminum intake tube that utilizes our patented air fusion and MR technology to produce huge power gains while retaining an OE quality fit and safe fuel trim levels. SuperNano-Web Dry Air Filter: \"That's massive!\"is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1206 cold air intake system. This filter has been uniquely designed to work with the downward facing orientation to ensure a leak-proof seal. Using the largest filter possible for this application has increased the available air volume - resulting in added power while keeping the installation process quick and simple. , , Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. , , Hassle-Free Installation: Make it easy! By designing this kit in a 3D workspace, you're ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood. Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your Subaru. After hours of designing and dyno teWRX STIng, Injen is proud to say that the EVO1206 Evolution Air Intake system puts down numbers of up to 26 additional horsepower and 34 Ft.-lbs. of torque.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLaunch Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eSeries.HyperBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":44287237619755,"sku":"INJEVO1206","price":500.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/1dbc3a6d6751ccaffa80ed5ac2ae1508.jpg?v=1783067640"},{"product_id":"injen-2015-subaru-sti-2-5l-4-cyl-turbo-black-cold-air-intake-w-mr-tech-and-heat-shield","title":"Injen 2015 Subaru STi 2.5L 4 Cyl (Turbo) Black Cold Air Intake w\/ MR Tech and Heat Shield","description":"Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A\/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLaunch Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eSeries.HyperBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":44287258951723,"sku":"INJSP1206BLK","price":437.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/2bf668e3a00ecb060555e18d4eeaf2e8.jpg?v=1783067700"},{"product_id":"injen-2015-subaru-sti-2-5l-4-cyl-turbo-polished-cold-air-intake-w-mr-tech-and-heat-shield","title":"Injen 2015 Subaru STi 2.5L 4 Cyl (Turbo) Polished Cold Air Intake w\/ MR Tech and Heat Shield","description":"Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A\/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLaunch Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eSeries.HyperBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":44287259017259,"sku":"INJSP1206P","price":437.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/2bf668e3a00ecb060555e18d4eeaf2e8_c383a66e-aa24-4e51-bc0f-6b6db11f6b2b.jpg?v=1783067700"},{"product_id":"injen-2015-subaru-sti-2-5l-4-cyl-turbo-wrinkle-red-cold-air-intake-w-mr-tech-and-heat-shield","title":"Injen 2015 Subaru STi 2.5L 4 Cyl (Turbo) Wrinkle Red Cold Air Intake w\/ MR Tech and Heat Shield","description":"Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A\/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLaunch Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eSeries.HyperBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":44287259115563,"sku":"INJSP1206WR","price":437.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/2bf668e3a00ecb060555e18d4eeaf2e8_26ec893c-e0c1-4dfe-9f2b-9eb49965215f.jpg?v=1783067701"},{"product_id":"injen-18-21-subaru-wrx-sti-h4-2-5l-turbo-sp-aluminum-series-cold-air-intake-polished","title":"Injen 18-21 Subaru WRX STI H4 2.5L Turbo SP Aluminum Series Cold Air Intake - Polished","description":"Injen Technology has done it once again with this new short ram air intake for the 2018-2021 Subaru WRX STI Equipped with the H4-2.5L Turbo Engine.  The Injen Technology SP1208 performance air intake system is the result of countless hours invested in research and development to provide a proven intake system designed to add power and performance to your STI.  The Injen Technology SP1208 intake system is a direct replacement for that restrictive factory airbox and provides a engineered solution that allows that turbo to breathe deeply and produce it's full power potential with a simple drop-in install.  To top it all off, no tune is required to get the power numbers noted!\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eS209\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eType RA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":44287260524587,"sku":"INJSP1208P","price":398.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/079408ef76e809622fcea642f4801776L.jpg?v=1783067704"},{"product_id":"injen-18-21-subaru-wrx-sti-h4-2-5l-turbo-sp-aluminum-series-cold-air-intake-wrinkle-black","title":"Injen 18-21 Subaru WRX STI H4-2.5L Turbo SP Aluminum Series Cold Air Intake - Wrinkle Black","description":"Injen Technology has done it once again with this new short ram air intake for the 2018-2021 Subaru WRX STI Equipped with the H4-2.5L Turbo Engine.  The Injen Technology SP1208 performance air intake system is the result of countless hours invested in research and development to provide a proven intake system designed to add power and performance to your STI.  The Injen Technology SP1208 intake system is a direct replacement for that restrictive factory airbox and provides a engineered solution that allows that turbo to breathe deeply and produce it's full power potential with a simple drop-in install.  To top it all off, no tune is required to get the power numbers noted!\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eS209\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eType RA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":44287260590123,"sku":"INJSP1208WB","price":398.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/3eb807ea409f18192a2932ce910afe4bL.jpg?v=1783067705"},{"product_id":"injen-18-21-subaru-wrx-sti-h4-2-5l-turbo-sp-aluminum-series-cold-air-intake-wrinkle-red","title":"Injen 18-21 Subaru WRX STI H4-2.5L Turbo SP Aluminum Series Cold Air Intake - Wrinkle Red","description":"Injen Technology has done it once again with this new short ram air intake for the 2018-2021 Subaru WRX STI Equipped with the H4-2.5L Turbo Engine.  The Injen Technology SP1208 performance air intake system is the result of countless hours invested in research and development to provide a proven intake system designed to add power and performance to your STI.  The Injen Technology SP1208 intake system is a direct replacement for that restrictive factory airbox and provides a engineered solution that allows that turbo to breathe deeply and produce it's full power potential with a simple drop-in install.  To top it all off, no tune is required to get the power numbers noted!\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eS209\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eType RA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":44287260655659,"sku":"INJSP1208WR","price":398.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/b8003a95f5e5baee9e90661d27f01a59L.jpg?v=1783067706"},{"product_id":"mishimoto-2015-subaru-sti-performance-intake-wrinkle-black","title":"Mishimoto 2015 Subaru STi Performance Intake - Wrinkle Black","description":"Add some horsepower to your 2015-2017 STI with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your 2015-2017 Subaru STI and includes everything needed to replace the restrictive stock airbox. Our engineers spent months fine-tuning this design in an attempt to squeak out every last bit of performance. This dyno-proven air intake provides 20 whp\/18 wtq gains over the stock intake while maintaining safe air\/fuel ratios, perfect for some extra punch on the street or autocross course. The Mishimoto Subaru 2015-2017 STI Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The mandrel-bent aluminum intake pipe is available with a red or black powder-coated finish or a polished aluminum finish. This pipe utilizes the Mishimoto air straightener and CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures (IATs), the air filter has been placed outside the hot engine bay, and a powder-coated heat shield prevents any heat-soak from occurring. The Mishimoto free-flowing air filter provides a 16% greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally, this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. A rubber cap is provided to place over the sound symposer housing. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the stock intake. The Mishimoto Subaru WRX\/STI Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLaunch Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eSeries.HyperBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":44296765800491,"sku":"MISMMAI-STI-15WBK","price":368.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/2a56c5b4ecce38bde66504c01c0dce63.jpg?v=1783115757"},{"product_id":"mishimoto-2015-subaru-sti-performance-intake-wrinkle-red","title":"Mishimoto 2015 Subaru STi Performance Intake - Wrinkle Red","description":"Add some horsepower to your 2015-2017 STI with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your 2015-2017 Subaru STI and includes everything needed to replace the restrictive stock airbox. Our engineers spent months fine-tuning this design in an attempt to squeak out every last bit of performance. This dyno-proven air intake provides 20 whp\/18 wtq gains over the stock intake while maintaining safe air\/fuel ratios, perfect for some extra punch on the street or autocross course. The Mishimoto Subaru 2015-2017 STI Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The mandrel-bent aluminum intake pipe is available with a red or black powder-coated finish or a polished aluminum finish. This pipe utilizes the Mishimoto air straightener and CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures (IATs), the air filter has been placed outside the hot engine bay, and a powder-coated heat shield prevents any heat-soak from occurring. The Mishimoto free-flowing air filter provides a 16% greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally, this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. A rubber cap is provided to place over the sound symposer housing. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the stock intake. The Mishimoto Subaru WRX\/STI Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLaunch Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eSeries.HyperBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":44296765964331,"sku":"MISMMAI-STI-15WRD","price":368.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/062cfb052a98f66a60cfed1778d0bd8a.jpg?v=1783115758"},{"product_id":"perrin-08-14-subaru-wrx-08-15-sti-cold-air-intake-black","title":"PERRIN 08-14 Subaru WRX \/ 08-15 STI Cold-Air Intake - Black","description":"PERRIN 08-14 Subaru WRX \/ 08-15 STI Cold-Air Intake - Black\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2014\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eImpreza\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2014\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eImpreza\u003c\/td\u003e\n\u003ctd\u003eWRX STI Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eImpreza\u003c\/td\u003e\n\u003ctd\u003eWRX STI Special Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLaunch Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003ctd\u003eSeries.HyperBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Perrin Performance","offers":[{"title":"Default Title","offer_id":44297559179307,"sku":"PERPSP-INT-322BK","price":348.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/02dd461a-a1e3-48aa-bc91-01ec4c188b42-800.jpg?v=1783128274"},{"product_id":"ets-subaru-sti-2015-air-intake-kit-stainless-steel","title":"ETS Subaru STI 2015+ Air Intake Kit Stainless Steel","description":"\u003cp\u003eThis stainless intake puts the STI's filter in the fender well and gives the turbo a smoother 3-inch inlet pipe. I'd use it when airflow demand increases and I want the filter away from engine-bay heat. The MAF housing differs from stock and requires a matching tune even when retaining the factory sensor. Choose stock-MAF or speed-density operation to suit the ECU and sensor setup. Includes the K\u0026amp;N filter for the matched intake arrangement.\u003c\/p\u003e","brand":"Extreme Turbo Systems","offers":[{"title":"Yes","offer_id":45241814220843,"sku":"200-30-INT-001","price":295.0,"currency_code":"USD","in_stock":true},{"title":"No - Speed Density","offer_id":45241814253611,"sku":"200-30-INT-004","price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/Untitled-1_5425fe55-6f1a-4561-8581-e39e31bb7ee8.jpg?v=1788301596"},{"product_id":"ets-subaru-sti-2015-air-intake-kit-titanium","title":"ETS Subaru STI 2015+ Air Intake Kit Titanium","description":"\u003cp\u003eThis titanium intake places the VA STI's filter in the fender well to feed the turbo away from engine-bay heat. I'd choose it when inlet flow, lower weight and the brushed or burnt titanium finish all matter.\u003c\/p\u003e\u003cp\u003eSelect MAF or speed-density configuration around the ECU setup. ETS specifies a tune for the larger MAF housing; the speed-density version needs the appropriate pressure\/temperature inputs and calibration. Keeping the factory sensor does not mean retaining factory scaling.\u003c\/p\u003e","brand":"Extreme Turbo Systems","offers":[{"title":"Yes \/ Brushed","offer_id":45241814319147,"sku":"200-30-INT-006","price":495.0,"currency_code":"USD","in_stock":true},{"title":"No \/ Burned","offer_id":45241814351915,"sku":"200-30-INT-002","price":495.0,"currency_code":"USD","in_stock":true},{"title":"Yes \/ Burned","offer_id":45241814384683,"sku":"200-30-INT-005","price":495.0,"currency_code":"USD","in_stock":true},{"title":"No \/ Brushed","offer_id":45241814417451,"sku":"200-30-INT-003","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/ets-subaru-sti-2015-air-intake-kit-titanium-featured-15-19-extreme-turbo-systems_157_67e62b4b-9442-48fd-a9f5-2d54e2818811.jpg?v=1788301597"},{"product_id":"cobb-redline-carbon-fiber-intake-for-2015-2021-subaru-wrx-sti","title":"COBB Redline Carbon Fiber Intake for 2015-2021 Subaru WRX STI","description":"\u003cp\u003eThe COBB Redline Carbon Fiber Intake blends premium engine-bay styling with a high-flow intake system developed for the 2015-2021 Subaru WRX STI.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHand-laid 2x2 twill carbon-fiber airbox and integrated scoop\u003c\/li\u003e\n\u003cli\u003eHigh-quality gloss clear finish and COBB Redline badging\u003c\/li\u003e\n\u003cli\u003ePre-oiled filter approximately 35% larger than the standard SF filter\u003c\/li\u003e\n\u003cli\u003eCFD-designed velocity stack and airflow straightener for consistent MAF readings\u003c\/li\u003e\n\u003cli\u003eCompatible with COBB Stage 1+SF and Stage 3 Off The Shelf maps for supported STI applications\u003c\/li\u003e\n\u003cli\u003e50-state legal under CARB EO D-660-79 when used according to COBB's application guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015-2021 Subaru WRX STI, including 2018 Type RA and 2019 S209. Does not fit VA WRX.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Not compatible with the COBB radiator shroud.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 725350\u003c\/p\u003e","brand":"COBB","offers":[{"title":"Default Title","offer_id":45318223364139,"sku":"COBB725350","price":875.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/cobb-725350-sti-redline-carbon-fiber-intake.jpg?v=1788933204"},{"product_id":"overtake-drive-by-wire-throttle-body-gasket-subaru-2004-2021-sti-2006-2007-wrx","title":"OVERTAKE Drive-By-Wire Throttle Body Gasket - Subaru  EJ 2004-2021 STI, 2006-2007 WRX","description":"\u003cp\u003eKeep your Subaru’s engine running exactly as it should with the OVERTAKE Drive-by-Wire Throttle Body Gasket. Designed for Subaru EJ engines including Subaru STI 2004-2021, WRX 2006-2007, and more, this gasket provides a precise, leak-free seal between the throttle body and intake manifold, helping maintain consistent airflow and reliable engine performance. Replaces Subaru OEM Gasket part numbers 16175AA243, 16175AA241, 16175AA242.\u003c\/p\u003e\n\u003cp\u003eA worn or damaged throttle body gasket can cause unmetered air leaks, leading to rough idle, inconsistent throttle response, and reduced efficiency. The OVERTAKE gasket is engineered for a factory-correct fit and dependable sealing, making it an essential replacement any time the throttle body is removed for service, cleaning, or performance upgrades.\u003c\/p\u003e\n\u003cp\u003eBuilt with durability in mind, this gasket is a simple but critical maintenance component for Subaru owners who care about long-term reliability and smooth drivability. Whether you’re refreshing your intake system or performing routine maintenance, the OVERTAKE Throttle Body Gasket helps ensure your WRX or STI continues to perform at its best.\u003c\/p\u003e\n\u003cp\u003ePerfect for preventative maintenance, easy installs, and peace of mind, because the small parts matter when it comes to performance.\u003c\/p\u003e","brand":"Overtake","offers":[{"title":"Default Title","offer_id":67946320822315,"sku":"A10479","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/overtake-a10479-overtake-drive-by-wire-throttle-body-gasket-1.jpg?v=1792440018"},{"product_id":"overtake-post-maf-hose-kit-subaru-2008-14-wrx-2008-21-sti","title":"OVERTAKE Post MAF Intake Hose Kit - Subaru 2008-2014 WRX, 2008-2021 STI, 2009-2013 Forester XT, 2005-2009 Legacy\/Outback","description":"\u003ch4\u003eWhat if the air getting to your turbo was actually flowing smoothly?\u003c\/h4\u003e\n\u003cp\u003eYour factory post-MAF hose is a wrinkled rubber accordion that disrupts airflow right where it matters most. Those corrugated folds create pockets and turbulence between the MAF sensor and turbo inlet, robbing you of clean airflow and crisp throttle response. The OVERTAKE Post MAF Hose replaces that compromised OEM design with 5-ply reinforced silicone, a smooth interior surface, and a tapered profile that matches your airbox and turbo inlet diameters precisely. Clean air in, better response out. This hose is a heavier duty replacement for OEM Subaru \u003cspan data-sheets-root=\"1\"\u003e46013AG020.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eWhat You'll Feel\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCrisper throttle response, especially at partial throttle\u003c\/li\u003e\n\u003cli\u003eSmoother power delivery through the rev range\u003c\/li\u003e\n\u003cli\u003eMore consistent boost behavior\u003c\/li\u003e\n\u003cli\u003eThat satisfaction of fixing something that should have been right from the factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-ply Reinforced Silicone Construction \u003c\/strong\u003e-\u003cstrong\u003e \u003c\/strong\u003e\u003cspan\u003ereinforced with stainless steel wire to prevent collapse under vacuum\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth Interior Walls \u003c\/strong\u003e- eliminate turbulence-causing pockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTapered End Design\u003c\/strong\u003e - matches OEM airbox and turbo inlet diameter\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect OEM Replacement \u003c\/strong\u003e- no trimming or modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Tune Required \u003c\/strong\u003e- Install the hose and let it rip!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality Hose Clamps \u003c\/strong\u003e- Secure fitment and enhanced durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details\u003c\/h4\u003e\n\u003cp\u003eThe factory rubber post-MAF hose uses corrugated folds to allow flexibility during installation, but those same folds create pockets that interrupt airflow. Worse, the OEM design often creates diameter steps between the airbox outlet and turbo inlet, generating small vortexes that disturb the air right after it passes the MAF sensor. The OVERTAKE silicone hose solves both problems. The smooth interior eliminates the pockets entirely, while the tapered center section transitions cleanly between the airbox and turbo inlet diameters without creating steps. The reinforced silicone is flexible enough for easy installation but rigid enough to hold its shape under full vacuum. It's also far more durable than the factory rubber, which cracks and degrades over time. Pair it with a quality panel filter and you've optimized your factory intake without needing a full cold air intake system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: 2015-2017 STI fitment will need OEM sound generator tube deleted, use included plug.\u003c\/p\u003e","brand":"Overtake","offers":[{"title":"OVERTAKE Blue","offer_id":67946321903659,"sku":"A10587BLU","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":67946321936427,"sku":"A10587RED","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":67946321969195,"sku":"A10587BLK","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/overtake-A10587BLU-ovetake-post-maf-hose-08-21-sti-blue-3_42d6d907-35f9-46e5-bcf8-caedacfc7734.jpg?v=1792440078"},{"product_id":"overtake-maxxflo-intake-panel-filter-subaru-2008-21-wrx-2008-18-sti-2009-18-forester-2013-17-crosstrek-2005-17-legacy-outback","title":"OVERTAKE Maxx Flo Intake Panel Filter - Subaru 2008-2021 WRX, 2008-2018 STI, 2009-2018 Forester, 2013-2017 Crosstrek, 2005-2017 Legacy, 2005-2017 Outback","description":"\u003ch4\u003eHigher Flow with Excellent Filtration | Overtake Maxx Flo Panel Filters\u003c\/h4\u003e\n\u003cp\u003eExperience next-level engine performance with the Overtake MaxxFlo Intake Panel Filters, delivering up to 15% more airflow compared to the factory paper filters. Built with advanced synthetic filtration media, MaxxFlo filters combine superior airflow with high-efficiency filtration. On top of that, all Overtake Panel Filters are 100% washable and reusable, so you will never need another filter for your factory airbox again!\u003c\/p\u003e\n\u003cp\u003eWith an average filtration efficiency of 98.1% as well as a 20.5g dust-holding capacity, Overtake MaxxFlo filters keep your Subaru engine cleaner for longer while maintaining optimal airflow. Our filters are tested to ISO 5011:2000 standards to ensure consistent, high-performance results. This air intake filter is a high performance replacement for OEM Subaru \u003cspan data-sheets-root=\"1\"\u003e16546AA12A, 16546AA120, 16546AA10A, 16546AA090.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eQuick Specs:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWashable and Reusable\u003c\/li\u003e\n\u003cli\u003eUp to 15% increase in airflow for improved engine response\u003c\/li\u003e\n\u003cli\u003e98.1% filtration efficiency for superior engine protection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Overtake","offers":[{"title":"Default Title","offer_id":67946322788395,"sku":"A10343","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/overtake-A10343-overtake-intake-panel-filter-08-21-wrx-1.jpg?v=1792440122"},{"product_id":"overtake-silicone-turbo-inlet-hose-subaru-wrx-sti-fxt","title":"OVERTAKE Silicone Turbo Inlet Hose - Subaru 2004-2021 STI, 2002-2007 WRX, 2004-2008 Forester XT","description":"\u003cp\u003eThe \u003cstrong\u003eOvertake Turbo Inlet Hose\u003c\/strong\u003e is designed to optimize your vehicle’s airflow and performance. Constructed from durable \u003cstrong\u003e5-ply silicone\u003c\/strong\u003e, this turbo inlet directly replaces the stock factory inlet, significantly improving the intake tract's efficiency. The high-quality silicone construction resists high engine bay temperatures, keeping intake air closer to ambient temperature for optimal engine performance. Reinforced with steel wire, this inlet hose prevents collapse under high vacuum conditions while still providing necessary flex between the engine and intake. This hose is a heavier duty replacement for OEM Subaru \u003cspan data-sheets-root=\"1\"\u003e14459AA361, 14459AA360, 14459AA510, 14459AA810, 14459AA510.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhy Upgrade to the Overtake Turbo Inlet?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eBy replacing the stock \"accordion-style\" inlet hose, the \u003cstrong\u003eOvertake Turbo Inlet Hose\u003c\/strong\u003e reduces turbulence in the intake tract, enhancing airflow efficiency. This improved airflow reduces engine stress and allows the turbocharger to perform more effectively, leading to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eIncreased Horsepower\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReduced Turbo Spool Time\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eImproved Throttle Response\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnhanced Acceleration\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe \u003cstrong\u003elarger diameter\u003c\/strong\u003e of the inlet enhances airflow potential to the turbo, helping your engine breathe easier and perform better across the entire RPM range.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Ply Silicone Construction\u003c\/strong\u003e: Durable and heat-resistant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play PCV Adapter\u003c\/strong\u003e: Offers OEM-level integration, simplifying the installation process.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect OEM Replacement\u003c\/strong\u003e: Easy, plug-and-play installation with no modifications required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Throttle Response and Acceleration\u003c\/strong\u003e: The optimized airflow path reduces stress and improves engine breathing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Turbochargers with 2.4\" Inlet\u003c\/strong\u003e: Specifically designed for turbochargers with a 2.4\" inlet, ensuring perfect fitment.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your 02-07 WRX, 04-21 STi, or 04-08 FXT with the Overtake Turbo Inlet Hose to experience improved horsepower, quicker turbo spool time, and better throttle response. This essential upgrade will enhance your engine’s efficiency and give your car the boost it deserves.\u003c\/p\u003e","brand":"Overtake","offers":[{"title":"OVERTAKE Blue","offer_id":67946323279915,"sku":"A10222BLU","price":280.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":67946323312683,"sku":"A10222RED","price":280.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":67946323345451,"sku":"A10222BLK","price":280.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/overtake-A10222BLU-overtake-turbo-inlet-04-21-sti-blue-1.jpg?v=1792440182"},{"product_id":"overtake-tgv-to-engine-gasket-set-subaru-wrx-sti-lgt-fxt-2-gaskets","title":"OVERTAKE TGV to Engine Gasket 2-Sets BUNDLE (4 gaskets total) - Subaru WRX \/ STI \/ LGT \/ FXT","description":"","brand":"Overtake","offers":[{"title":"Default Title","offer_id":67946326261803,"sku":null,"price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/overtake-A10035-overtake-subaru-tgv-engine-gasket.jpg?v=1792440408"},{"product_id":"overtake-phenolic-spacers-8mm-thick-subaru-ej-engines","title":"OVERTAKE Phenolic Spacers 8mm Thick- Subaru EJ Engines","description":"\u003ch4\u003e\u003cstrong\u003eOvertake Phenolic Intake Manifold Thermal Spacer | Reduce Heat, Increase Power\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eIs your Subaru engine running at its full potential? One of the biggest obstacles to maximizing your engine's performance is heat soak – when heat from your engine transfers into your intake manifold, reducing air density and limiting power. The cooler the intake air, the more horsepower your engine can achieve. That's where the \u003cstrong\u003eOvertake Phenolic Intake Manifold Thermal Spacer\u003c\/strong\u003e comes in, providing the perfect solution to this long-standing issue by raising the intake manifold off the superheated boxer engine.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Are Phenolic Spacers?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003ePhenolic spacers are widely used in high-performance automotive applications, but this technology is a breakthrough for Subaru owners. By reducing the heat transfer between the engine and intake manifold, \u003cstrong\u003eOvertake Phenolic Spacers\u003c\/strong\u003e help lower intake temperatures and increase power.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eKey Benefits:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduce Heat Soak:\u003c\/strong\u003e Minimizes heat transfer from the engine to the intake manifold, keeping intake temperatures lower for improved performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Power Output:\u003c\/strong\u003e For every 5-degree reduction in intake air temperature, your engine can gain up to 1% more power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Air Density:\u003c\/strong\u003e Cooler intake air is denser, allowing for more air to mix with fuel, resulting in better fuel efficiency and power gains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality Phenolic Material:\u003c\/strong\u003e Unlike inferior alternatives made from cutting board materials, our \u003cstrong\u003etrue phenolic\u003c\/strong\u003e construction stands up to extreme heat without compromising performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Bolt-On Installation:\u003c\/strong\u003e A direct fit to your Subaru. For best results, we recommend using \u003ca href=\"\/products\/overtake-tgv-to-engine-gasket-set-subaru-wrx-sti-lgt-fxt\"\u003etwo sets of gaskets\u003c\/a\u003e – one on each side of the spacer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace Fuel Safe:\u003c\/strong\u003e Overtake Phenolic Spacers have been rigorously tested and proven safe for use with race fuel, E85, and methanol.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eHow Do Phenolic Spacers Work?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYour Subaru’s intake air travels from the airbox into the turbo and then into the intake manifold. As it passes through the manifold, it absorbs heat from the surrounding aluminum, which decreases air density and robs your engine of potential power. In stock form, a steel gasket sits between the intake manifold and engine, allowing heat to transfer into the manifold. Replacing the steel gasket with the \u003cstrong\u003eOvertake Phenolic Spacer\u003c\/strong\u003e greatly reduces this heat transfer.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUpgrade your Subaru’s performance with the \u003cstrong\u003eOvertake Phenolic Intake Manifold Thermal Spacer\u003c\/strong\u003e and experience cooler intake temperatures, better air density, and more power.\u003c\/p\u003e","brand":"Overtake","offers":[{"title":"Default Title","offer_id":67946329276459,"sku":"A10289","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/overtake-A10289-overtake-phenolic-spacers-8mm-thick-subaru-ej-engines-1.jpg?v=1792440593"},{"product_id":"overtake-tgv-to-engine-gasket-set-subaru-wrx-sti-lgt-fxt","title":"OVERTAKE TGV to Engine Gasket Set - Subaru WRX \/ STI \/ LGT \/ FXT","description":"\u003ch4\u003eOvertake TGV Gasket | Be Done With Leaks\u003c\/h4\u003e\n\u003cp\u003eOvertake TGV to Engine Gaskets are a must-have for any TGV removal or installation. We highly recommend replacing these gaskets every time you remove your TGVs to ensure a proper seal and maintain optimal engine performance.\u003c\/p\u003e\n\u003cp\u003eThis set includes two gaskets. For the best results, consider adding an additional set to pair with your Overtake Phenolic Spacers for a complete upgrade. This gasket is a heavier duty replacement for OEM Subaru Gasket 14035AA421 and 14035AA420.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The pin holes on these gaskets are intentionally slightly smaller than the guidance pins. During installation, use a small socket to gently press the gaskets onto the pins, ensuring they stay securely in place as you install the TGVs and manifold.\u003c\/p\u003e","brand":"Overtake","offers":[{"title":"Default Title","offer_id":67946333831211,"sku":"A10035","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/overtake-A10035-overtake-subaru-tgv-to-engine-gaskets-2_1.jpg?v=1792440680"},{"product_id":"overtake-intake-manifold-to-tgv-gasketpair-enlarged-bore-subaru","title":"OVERTAKE Intake Manifold to TGV Gasket(pair) - Enlarged Bore - Subaru","description":"\u003ch4\u003eOvertake Intake Manifold Gasket | Be Done With Leaks\u003c\/h4\u003e\n\u003cp\u003eOvertake Enlarged Bore Intake Manifold-to-TGV Gaskets are designed to enhance airflow and performance in your engine. Unlike the small OEM gaskets, which feature a smaller hole diameter, our enlarged bore gaskets offer a perfect match between the intake manifold and TGV ports. The OEM gaskets limit the port alignment, restricting airflow and reducing performance during porting. With Overtake’s enlarged bore gaskets, you can perfectly align the intake manifold and TGV, significantly improving airflow at a critical point just before air enters the engine, resulting in better engine efficiency and power.\u003c\/p\u003e\n\u003cp\u003eThese Overtake gaskets are also an excellent, cost-effective OE replacement, making them ideal for both ported and non-ported TGV applications. Upgrade your intake system with Overtake to optimize your vehicle’s performance. This gasket is a heavier duty replacement for OEM Subaru Gasket \u003cspan data-sheets-root=\"1\"\u003e14075AA161 and 14075AA160.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eKey Features:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnlarged Bore Design\u003c\/strong\u003e for perfect port alignment between intake manifold and TGV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Airflow\u003c\/strong\u003e for better engine efficiency and performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCost-Effective OE Replacement\u003c\/strong\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for Ported or Non-Ported TGVs\u003c\/strong\u003e to optimize airflow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Fit\u003c\/strong\u003e ensures seamless integration with your intake system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Overtake","offers":[{"title":"Default Title","offer_id":67946333863979,"sku":"A10036","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1817\/9115\/files\/overtake-A10036-overtake-subaru-tgv-to-intake-manifold-gaskets.jpg?v=1792440684"}],"url":"https:\/\/www.red5garage.com\/collections\/va-sti-engine-intakes.oembed","provider":"Red 5 Garage","version":"1.0","type":"link"}